Specifications:
- Control Power Transformer: 2 KVA, 1 PH, 60 Hz, P/N 19190N
- Primary: 690 VAC, 2.89 Amps
- Unit will not saturate up to primary voltage of 897 VAC
- Secondary: 175 VAC, 11.4 Amps, when primary is 690 VAC
- Secondary: 228 VAC, 11.4 Amps, when primary is 897 VAC
- Copper winding construction
- Primary and secondary copper bus bars are 1/8″ x 5/8″ with one hole
- NEMA 1 enclosure: 17″L x 10″W x 10″D approximately
- One louver is added to the enclosure for free air flow
The photo of the transformer and the enclosure is shown below:
The schematic diagram is shown below:
To discuss your specific application, please call our phone number at (714) 624-4740, or send us an email at quote@lcmagnetics.com.
(Relevant matches to this category are shown below)
Celebrating 30 years in business
Send us an email for a Free Quote.
quote@lcmagnetics.com
Tel: (714) 624 4740
Our engineers will respond within the hour.
L/C Magnetics Inc. is a manufacturer, re-seller and distributor of transformer products from 0.1 KVA to 50 MVA, dry type or oil filled
Our CEHCO division (www.cehco.com) builds DC Rectifiers, Transformer Rectifier Assemblies and Custom Power Supplies.
(Relevant matches to this category are shown below)
P/N 19190N
Hard to find three phase to isolation transformer 2 KVA
Discontinued isolation transformer 2 KVA
Obsolete isolation transformer 2 KVA
Specialty isolation transformer 2 KVA
Out of production isolation transformer 2 KVA
Custom isolation transformer 2 KVA
Low voltage isolation transformer 2 KVA
High current isolation transformer 2 KVA
Control power transformer 2 KVA
Isolation transformer 2 KVA
Single phase transformer 2 KVA
One phase transformer 2 KVA
1 PH isolation transformer 2 KVA
690 VAC to 175 VAC isolation transformer
690 VAC to 175 VAC single phase transformer
690 VAC to 175 VAC 1 PH transformer
690 VAC to 175 VAC one phase transformer
690 VAC isolation transformer
175 VAC isolation transformer