1 PH TO 3 PH ASSEMBLY, 20 KVA, P/N 9513L1

   Specifications:

    • 1 PH to 3 PH Assembly, 20 KVA, 60 Hz, P/N 9287L, Rev A
    • The unit consists of one Auto Transformer and one 1 PH to 3 PH converter in one enclosure
    • Input: 240 VAC, 83 Amps, 1 PH, 60 Hz
    • Output: 208 VAC, 56 Amps, 3 PH, 60 Hz
    • Indoor enclosure: 32″W x 42″H x 22″D
    • Estimated weight: 400 lbs. or TBD

The system block diagram is shown below:

 

 

The details of the Auto Transformer are shown below:

 

 

Specifications:

    • Auto Transformer, 20 KVA, 1 PH, 60 Hz
    • Input (1, 3): 240 VAC, 83 Amps
    • Output (1, 2): 208 VAC, 96 Amps
    • Copper windings
    • Approvals: None
    • Input/Output copper bus bars 1/4″ x 1″ with one hole
    • Open core & coil: 7″W x 7″H x 7″D

 

The details of the 1 PH to 3 PH Power Converter is shown below:

 

Specifications:

    • 1 PH to 3 PH Converter, 20 KVA,60 Hz, P/N LPT-2
    • Input (L1, L2): 220 VAC, 90 Amps, 1 PH (2 lines)
    • Output (T1, T2, T3): 220 VAC, 52 Amps, 3 PH (3 lines)
    • Indoor enclosure: 26”W x 37″H x 18”D
    • Total shipment weight: 200 lbs.

The layout inside the enclosure is shown below:

The photo of the enclosure is shown below:

To discuss your specific application, please call our phone number at (714) 624-4740, or send us an email at quote@lcmagnetics.com

 

 

Specifications:

    • 1 PH to 3 PH Assembly, 20 KVA, 60 Hz, P/N 9287L, Rev A
    • The unit consists of one Auto Transformer and one 1 PH to 3 PH converter in one enclosure
    • Input: 240 VAC, 83 Amps, 1 PH, 60 Hz
    • Output: 208 VAC, 56 Amps, 3 PH, 60 Hz
    • Indoor enclosure: 32″W x 42″H x 22″D
    • Estimated weight: 400 lbs. or TBD

The system block diagram is shown below:

 

 

The details of the Auto Transformer are shown below:

 

 

Specifications:

    • Auto Transformer, 20 KVA, 1 PH, 60 Hz
    • Input (1, 3): 240 VAC, 83 Amps
    • Output (1, 2): 208 VAC, 96 Amps
    • Copper windings
    • Approvals: None
    • Input/Output copper bus bars 1/4″ x 1″ with one hole
    • Open core & coil: 7″W x 7″H x 7″D

 

The details of the 1 PH to 3 PH Power Converter is shown below:

 

Specifications:

    • 1 PH to 3 PH Converter, 20 KVA,60 Hz, P/N LPT-2
    • Input (L1, L2): 220 VAC, 90 Amps, 1 PH (2 lines)
    • Output (T1, T2, T3): 220 VAC, 52 Amps, 3 PH (3 lines)
    • Indoor enclosure: 26”W x 37″H x 18”D
    • Total shipment weight: 200 lbs.

The layout inside the enclosure is shown below:

The photo of the enclosure is shown below:

To discuss your specific application, please call our phone number at (714) 624-4740, or send us an email at quote@lcmagnetics.com