THREE PHASE GAPPED INDUCTOR 70 uH, 400 Amps
P/N 19583L

Specifications:

• Three Phase Gapped Inductor, P/N 19583L
• L (1, 2) = 70 uH, 400 Amps
• L (3, 4) = 70 uH, 400 Amps
• L (5, 6) = 70 uH, 400 Amps
• Copper magnet wire: 0.408″ x 0.204″, three in parallel
• E Core P/N: SE4575L1. Core material: Amorphous Metglas, 0.001” thick
• Number of turns per coil: 10.5 turns
• Copper bus bars are 1″ x 1/4″ with one hole
• Copper windings. Approvals: None
• Open core & coil: 14.0″W x 14.5″H x 9.0″D approximately. Estimated weight: 85 lbs.

The photo of the Three Phase Gapped Inductor is shown below:

The schematic diagram of the Gapped Inductor is shown below:

The test results are shown in Table A for gap = 0.128”. Inductance meter is used to measure the inductances at 60 Hz, 120 Hz, 400 Hz and 2000 Hz.

Table A

The test results are shown in Table B for gap = 0.117”. Inductance meter is used to measure the inductances at 60 Hz, 120 Hz, 400 Hz and 2000 Hz.

Table B