The Air Core Reactor consists of three inductors. Each air core inductor is inside an enclosure with 10” insulator in the bottom of the enclosure. The input power is 15000 VAC, 3 PH, 60 Hz. A 28” high aluminum pedestal is connected to the bottom reactor. The three reactors are stacked one above the other in a vertical fashion. The approximate assembled dimensions are 200”H x 100”W x 100”D. Circuit breakers are supplied by the customer. A 959 volts drop is observed at 1200 amps continuous current.

 

Specifications:

 

  • Air Core Reactor, P/N 6685L
  • Inductance: 2.12 mH
  • Impedance: 0.8 Ohm
  • Continuous current: 1200 Amps
  • Available current: (TBD)
  • Fault current: 10000 Amps
  • Voltage: 15000 VAC L-L, 8660 VAC L-N
  • Voltage drop: 11%
  • Copper bus bars are 6” x 4” x 3/8” thick with 6 holes
  • Dimensions: 200”H x 100”W x 100”D approximately (3 stack high)
  • Estimated Weight: 1000 lbs
  • Three separate units are shipped as 40” high stack
  • 28” high Aluminum pedestal is only required for the bottom stack

Three inductors will be stacked vertically to make a complete CLR system. The photo of the enclosure and the three inductors is shown below. The enclosure is large enough to accommodate the three inductors. Free air flow will maintain the temperature rise to 40 degrees C above ambient. The inductors are spaced to minimize magnetic interference among the three inductors as well as other equipment adjacent to the unit.
MEDIUM VOLTAGE AIR CORE REACTOR, 1200 AMPS CONTINUOUS FAULT CURRENT 10000 AMPS, P/N 6685L
The customer application is shown below. The voltage drop across each inductor is 959 VAC at 1200 Amps continuous current.
MEDIUM VOLTAGE AIR CORE REACTOR, 1200 AMPS CONTINUOUS FAULT CURRENT 10000 AMPS, P/N 6685L Schematic Diagram
The details of Air Core Reactor are shown below.
MEDIUM VOLTAGE AIR CORE REACTOR, 1200 AMPS CONTINUOUS FAULT CURRENT 10000 AMPS, P/N 6685L Schematic Diagram
All our auto transformers are custom built to order. To discuss your specific application, please call our phone number at (714) 624-4740, or send us an email at info@LCMAGNETICS.COM.