DRY TYPE AUTO TRANSFORMER 1.25 MVA, P/N 6112A

Specifications:

  • Dry Type Auto Transformer: 1.25 MVA, 3 PH, 60 Hz, P/N 6112A
  • Input: 480 VAC, 1503 Amps, 3 PH, 60 Hz
  • Output: 440 VAC, 1640 Amps, 3 PH, 60 Hz
  • Copper winding construction
  • Copper bus bars are 4” x 3/8” with two holes
  • P/N 6112L consist of three single phase auto transformers (T1, T2 and T3) inside an indoor enclosure
  • Indoor Enclosure: 56”H x 36”W x 26”D
  • All input/output connections are inside the enclosure

The schematic diagram of the auto transformer using T1, T2 and T3 is shown below:

 

6112A_AT

Schematic Diagram, P/N 6112A

 

The description of T1, T2 or T3 is shown below:

 

6112A(1)_AT

Description of T1, T2 or T3

 

T1, T2 and T3 will be housed inside an indoor enclosure as shown below. The three neutrals will be joined together with jumpers J1 and J2.

 

6112A(2)_AT

Indoor Enclosure, 50”H x 36”W x 26”D

 

The photo of the enclosure is shown below:

 

6112A_AT

Indoor Enclosure

 

This is an auto transformer. It is not an isolation transformer. The unit is a dry type auto transformer with an indoor enclosure. It is not an oil filled auto transformer.

To discuss your specific application, please call us at (714) 624-4740, or send us an email at quote@lcmagnetics.com.